*Note: We do not sell instruction manuals however we highly recommend that you use the Water4Gas instructions.  You can purchase them online at:

 

Text Box:     The Enhanced Kit consists of the 
     following Items:

1- one quart wide mouth mason jar
1– plastic jar cap
2- 2.17”x5.75”x1/4” Plexiglas sheets
15’- 316L stainless steel wire .035”
1– inline fuse holder
2– fuse 10 amp
1– relay set
	relay (5pin Bosch style relay)
	relay connector
	10-12 gauge terminals (2)
	14-18 gauge terminals (2)
12 gauge wire automotive (6’)
18 gauge wire automotive (6’)
1– 14-18 gauge splice connector
1– 10-12 gauge butt connector
2– 10-12 gauge 1/4”eyelet terminals 
2– 10-12 gauge 5/16” eyelet terminal
2– 1/4”x1” stainless steel bolts
4– 1/4” stainless steel washers
2– 1/4” stainless steel hex nuts
2– 1/4” stainless steel wing nuts
2– 90 degree 1/4” barbed fittings
1- “T” fitting 1/4” barbed
1– one way check valve 
1– irrigation bubbler
1– 6”clear tubing for bubbler
1/4” vacuum line (automotive) 6’
Text Box:     Add on cell includes the following:

1-onequart wide mouth mason jar
1-plastic jar cap
2- 2.17”x5.75”x1/4” Plexiglas sheets
15’- 316L stainless steel wire .035”
2– 10-12 gauge 1/4”eyelet terminals 
2– 1/4”x1” stainless steel bolts
4– 1/4” stainless steel washers
2– 1/4” stainless steel hex nuts
2– 1/4” stainless steel wing nuts
2– 90 degree 1/4” barbed fittings
1– irrigation bubbler
1– 6”clear tubing for bubbler
1/4” vacuum line (automotive) 3’
1- “T” fitting 1/4” barbed

Caution:

These kits are designed to produce Oxy/hydrogen gases which are extremely flammable. Use extreme caution in wiring and operation of the fuel cells.

This 2 Pack purchase consists of all the components needed to construct an HHO Fuel Cell & an Additional Fuel Cell to create a series application (as described  in the Water4Gas fuel cell instruction manual*)  It also includes all of the extra components needed to install it in your vehicle.  On top of that - we recognize the need not to overload a “key on” circuit; therefore we have added a relay that will not overload the system.  Our kit includes enough  wire and all of the  terminals and connectors to eliminate multiple splices.

SKU/Item Number: 1300C

Price:$69.99

Water4Gas Fuel Cell Kit

2 Pack Series Special

FUEL SAVERS

HHO Fuel Cell Kits For Less

**This kit is intended for (1) vehicle to run a series application.**

Special Offer

With the purchase of our 2 pack special you can get the 2 towers precut and wrapped with your order for only $17.00 extra.

SKU/Item Number: 1300E

Price:$86.99

See Special Offer Below